How to Install a COMPLETELY New Front Suspension in your Car or Truck

20 Bal 2019
4 435 092 Peržiūros

Learn how to replace the ENTIRE front suspension of your car in this two episode series. Here I will show you how to install a brand new wheel bearing, ball joints, control arms, tie rod, strut, and axle.
The ball joint and wheel bearing has to be pressed into the knuckle and I have a bunch of tips and tricks to make that easy. I show how to properly install a tie rod (safely) and get an accurate measurement so you can get the car aligned. I also show you how to properly torque down bolts with bushings so you don't tear them. The rest of the suspension parts are pretty simple to install and then we go for a ride to see how much better the car handles!
First EPISODE: ltworlds.info/home/vaizdo-ra-as/0oNkya2RkbGShJM.html
How to Replace Sway Bar End Links: ltworlds.info/home/vaizdo-ra-as/u6CkpLWaqMyUg9I.html
How to Replace Wheel Bearing: ltworlds.info/home/vaizdo-ra-as/y5eRutd9ea-fiaQ.html
Tools and Products:
Mevotech Suspension Parts: amzn.to/2VKrmfr
Rust Paint: amzn.to/2Dg5yAV
Impact gun: amzn.to/2It3KIo
Torque Wrench: amzn.to/2UO2yFY
Bearing Press: amzn.to/2Gh8tv3
Ball Joint Press: amzn.to/2UTxEvR
Silicone Paste: amzn.to/2DsSisN
Grease Gun: amzn.to/2Iy11hm
Chassis Grease: amzn.to/2IGc2g5
→ Become a ChrisFix Subscriber: ltworlds.info
→ Instagram: instagram.com/chrisfixit
→ Facebook: facebook.com/chrisfix8
→ Website: www.ChrisFixed.com
→ My Channel Home Page: ltworlds.info
**If the video was helpful, remember to give it a "thumbs up" and consider subscribing.**
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Komentarai
  • I am pumped now that the suspension is all good and the surprise at the end of the video! We are gonna have some fun with this car! PS I will have a car meetup in Toronto Canada this Tuesday. Check my stories on LTworlds, Instagram or Facebook page for more info!!!

    ChrisFixChrisFixPrieš metus
    • Hi Chris. Thanks for the video, I always enjoying watching them. Youre very clear and show how the common man/woman can fix their car. As I was watching I saw the part where you tried to crimp the top and bottom of that ring and you said you couldn't get to it properly. I have an idea. You know you get them workbench clamps with a wooden handle? Couldn't you use that with a flat head bit? Put that above the place you need to dent it and then clamp the dent in? Take care mate. Greetings from England

      Mike JarrattMike JarrattPrieš 7 dienų
    • Bro your a beast great video awsome detail

      Joseph BertolinoJoseph BertolinoPrieš 16 dienų
    • 1

      Nazarius NazariusNazarius NazariusPrieš 18 dienų
    • Hi ChrisFix I really give my salute for every vlog you make its very informative and professional... Watching and support here Al Khafji Saudi Arabia from General Trias Cavite Philippines...

      Nilo YuNilo YuPrieš 29 dienų
    • where is the turbo build video? asking after a year wait...

      ugyen sampangugyen sampangPrieš mėn
  • IMPORTANT INFO Each Bearing has one side that's magnetic. be sure to install Bearings with the magnetic side in towards the car. the magnetic ring is part of the speed sensor system in your car. if not installed improperly, (that is with the magnetic ring facing outward) the ABS won't work. That is for the front wheels. the rear bearing comes as a complete assembly and the bearing is already properly installed. If your rear bearing is not part of an assembly, be sure they have also been installed property as well.

    Middle Class LifeMiddle Class LifePrieš 7 val
  • Chrisfix, where have you been all my life? You have saved me a lot of $$$, i would be lost without you.

    Charles BlackmanCharles BlackmanPrieš 9 val
  • hey Chris have you ever try teaching?

    hau vuhau vuPrieš 13 val
  • The economic peace summarily strap because band ultrastructurally whirl athwart a callous microwave. piquant, fresh test

    Yamilet MorseYamilet MorsePrieš 17 val
  • $100 or $1000 dollars.

    Nora MuñozNora MuñozPrieš 18 val
  • its 2021 and im waiting for turbo honda

    gti digifant blokadagti digifant blokadaPrieš dieną
  • Dios te bendiga hermano

    Luis PichardoLuis PichardoPrieš dieną
  • It looks like you used very soft suspension. Realized from when you turn the steering wheel car hurling.

    Ali ÇEKİAli ÇEKİPrieš 2 dienas
  • thank you

    james phajames phaPrieš 2 dienas
  • Someone 2021 here?

    MLG SPONGEMLG SPONGEPrieš 2 dienas
  • I can do this faster... In car mechanic simulator

    KoutrouKoutrouPrieš 3 dienas
  • Any update on the turbo installation? Would love to see it done as I use to own the same exact car 20+ years ago.

    H TH TPrieš 3 dienas
  • 😁😁😁😁😁😁😁😁

    Adrian RamirezAdrian RamirezPrieš 4 dienas
  • when will you upload the ebay turbo installation video

    KARMA GamingsKARMA GamingsPrieš 4 dienas
  • i guess you get what you pay for, $300 with about 10 grand worth of work

    roundhouse smashroundhouse smashPrieš 4 dienas
  • Very nice Awesome video

    Honda guy buys housesHonda guy buys housesPrieš 5 dienų
  • thanks good tips !!!!!!

    RODRIGO ALVAREZRODRIGO ALVAREZPrieš 5 dienų
  • this man make this looks so easy to do, organized work makes it easier ,nice video, it will help a lot of people

    PitZery SQPitZery SQPrieš 5 dienų
    • Thanks a lot!

      ChrisFixChrisFixPrieš 5 dienų
  • May I know the year and model of this Honda civic?

    Bal LoneyBal LoneyPrieš 6 dienų
    • 1993 Honda Del Sol (CRX)

      ChrisFixChrisFixPrieš 5 dienų
  • Wish you showed the cleaning and painting of the calipers

    Magdaleno ThomasMagdaleno ThomasPrieš 6 dienų
  • I learned so much from this video

    BLS36BLS36Prieš 6 dienų
  • Super well done.

    Quantum JJQuantum JJPrieš 6 dienų
    • Thanks a lot!

      ChrisFixChrisFixPrieš 6 dienų
  • Chris fix at his big age worried about getting told off for putting car parts in the freezer

    Gautam DamojipurapuGautam DamojipurapuPrieš 7 dienų
    • Freezer is for food, not car parts lol

      ChrisFixChrisFixPrieš 6 dienų
  • I feel bad for the kid who sold it for $300, he gave Chris a new toy to fix. Now, damn that honda running smoothly

    佐々木いと佐々木いとPrieš 7 dienų
  • How much cost

    Luis MalacacLuis MalacacPrieš 7 dienų
    • Completely new front suspension for Honda civic 98

      Luis MalacacLuis MalacacPrieš 7 dienų
  • When will the turbo be installed?

    Manoah AltingManoah AltingPrieš 7 dienų
  • What’s the best grease to lubricate a rack and pinion?

    RobynsMan1016RobynsMan1016Prieš 8 dienų
  • Cool

    By DeriBy DeriPrieš 8 dienų
  • Hey Chris, I wanted to ask, How much do you think something like this would cost for a 1998 c5 corvette?

    Gabe GrahamGabe GrahamPrieš 8 dienų
    • Probably $1K or more

      Daily dose of Vitamin JDaily dose of Vitamin JPrieš 7 dienų
  • Chris come help me on my car

    It hurts to Hear the truthIt hurts to Hear the truthPrieš 9 dienų
  • The camera work is so on point. Makes everything so simple to understand.

    Sum Yung GuySum Yung GuyPrieš 9 dienų
  • I’m 10

    Jen pro me RamizJen pro me RamizPrieš 9 dienų
  • This video made me realize I need good tools lol

    jamaican sensationjamaican sensationPrieš 10 dienų
  • When you press something into a bearing, you need to support the inside of it, when you press a bearing in a hole you need to support the outside.

    Briggs StrattonBriggs StrattonPrieš 10 dienų
  • Chris, (or anyone), approximately how much does it cost to do both sides? How much time does it take?

    Wayne AshbyWayne AshbyPrieš 11 dienų
  • chris, when will you start installing the turbokit?

    Ebubekir HalidEbubekir HalidPrieš 11 dienų
  • While these videos are great for step by step educational/teaching, DIY, I do not believe one bit that this job is “easy”. These videos are cut/edited, and you never see the hard parts. Don’t try to tear apart your car cause Chris fix makes it look “easy”. There’s a lot of great actors out there just saying. Ask any mechanic. Get it done professionally with warrantied work and peace at mind. Not in your driveway, with LTworlds.

    michael johnmichael johnPrieš 12 dienų
  • Why is it so easy to watch his videos compared to others? Lol

    Robert OrtegaRobert OrtegaPrieš 13 dienų
  • 24:21 not sure about to torque the log nuts under load I always do this without load so you don't strip the threads.

    WolenvWolenvPrieš 13 dienų
  • It really is this easy and not because he cherry picked shots. take your time and do it.

    dish125dbdish125dbPrieš 13 dienų
    • If you take your time and prepare before + stay organized, the job always comes out better!

      ChrisFixChrisFixPrieš 13 dienų
  • I watched the whole video excellent good job thanks

    muttiah shanmuttiah shanPrieš 13 dienų
    • Awesome! Thanks!

      ChrisFixChrisFixPrieš 13 dienų
  • Great job 😄😁😄

    Joel Roman MendozaJoel Roman MendozaPrieš 14 dienų
  • 💯

    Salvador LucianoSalvador LucianoPrieš 14 dienų
  • Still waiting on that turbo kit...

    dandanPrieš 14 dienų
  • 2021?

    Luke wilsonLuke wilsonPrieš 15 dienų
  • Still no turbo kit vid 😕

    deykno87deykno87Prieš 15 dienų
  • Growing up I always saw my dad and his friends fixing cars and by watching this video and seeing all the car parts it brought back a lot of memories!!!

    Mr PauliMr PauliPrieš 15 dienų
  • A $8,000 new wheels, tires and suspension replacements on a very, very car that sold for $500.

    inn newsinn newsPrieš 15 dienų
  • 2021 anyone??😳😳😳

    Harrison RobbinsHarrison RobbinsPrieš 16 dienų
  • Chris should repaint his car

    Huzaifa HaiderHuzaifa HaiderPrieš 16 dienų
  • ChrisFixing it in the Year 2021!!!

    Rohit Das OfficialRohit Das OfficialPrieš 16 dienų
  • 15:01 to 15:07 listen to what he says and remember to always lubricate your axels

    Bodhi FareroBodhi FareroPrieš 16 dienų
  • Thanks Chris after watching your videos I managed to do the whole job on my own for which I was quoted £7500

    Shabbar RajaShabbar RajaPrieš 16 dienų
  • The production of these videos and the speed... no bs... is priceless. Thank you Chris

    Fitness JeffFitness JeffPrieš 16 dienų
  • I love how you konw your shxt like a pro But explain it in a simple and normal way. Quick and stright foward.

    Nobleness DeeNobleness DeePrieš 16 dienų
  • This is great....

    Benja Guta FixBenja Guta FixPrieš 16 dienų
  • should have used aftermarket parts..... All that work and money and there is still so much body roll

    GiveMeMuhFreeSpeech YoutubeHitlersGiveMeMuhFreeSpeech YoutubeHitlersPrieš 17 dienų
  • Chris making it look easy. Enjoyed the vid but that’s too hard for me.

    ThemachineThemachinePrieš 17 dienų
  • Hi Chrisfix, I really love your videos. Can you do one on how to change the suspension of a Mercedes sprinter 515cdi please?😋

    Nana Baffour BritwumNana Baffour BritwumPrieš 17 dienų
  • Hi Chrisfix, I really love your videos. Can you do one on how to change the suspension of a Mercedes sprinter 515cdi please?😋

    Nana Baffour BritwumNana Baffour BritwumPrieš 17 dienų
  • Cool video

    Steven BennettSteven BennettPrieš 17 dienų
  • I love your vids. mate, your enthusiastic and cheerful voice is just making these vids. so much fun to watch!

    major9686major9686Prieš 18 dienų
  • Great video! The only thing I think you should've replaced are those output seals 15:55 since you already had the CV axles out, it would've been great preventative maintenance to replace them

    eldom72eldom72Prieš 18 dienų
    • That would have been nice

      Vitaly JVitaly JPrieš 18 dienų
  • Who is still waiting for that turbo installation video?

    Zhixuan HuanZhixuan HuanPrieš 19 dienų
  • Where did it go

    Garrison Bro’s vintage carsGarrison Bro’s vintage carsPrieš 19 dienų
  • Is a C-clamp ok in place of a ball joint press?

    Forza Mortorsport 6 Supercharged RacingForza Mortorsport 6 Supercharged RacingPrieš 19 dienų
  • Bgood job

    Steevens CastelSteevens CastelPrieš 19 dienų
  • Hey chris Great video, some much knowledge to gain here Thankyou Is medium strength thread lock the same as removable thread lock? If not, when should removable thread lock be installed? I see that you didn’t put it on the bushing bolt at 16:50

    Andrew BoulosAndrew BoulosPrieš 20 dienų
  • What Lugs did you use

    XquisiteXquisitePrieš 20 dienų
  • How do you know the difference in 7,40, or 80 pounds of torque?

    Stephano VargasStephano VargasPrieš 20 dienų
  • The arrogant beast neuroanatomically spark because sardine only claim pro a careful salesman. axiomatic, lacking peripheral

    Vinh NguyễnVinh NguyễnPrieš 21 dieną
  • Always he work on this fucked car

    Alireza AminiAlireza AminiPrieš 21 dieną
  • Did you ever use the ebay turbo kit Chris?

    mopmopPrieš 21 dieną
  • Very good teaching and excellent job very important to me thanks brother 👍

    pablo gonzalezpablo gonzalezPrieš 22 dienas
  • i need to do this on my civic. we just finished a k24 swap and coilovers but everything else needs an update. the chassis has 320k on it.

    Toby MaplesToby MaplesPrieš 22 dienas
  • hello chris , can you fix my ford truck, i want to add a leaf spring and change my shocks

    Loyd RanonLoyd RanonPrieš 22 dienas
  • DO THE TURBO KIT VIDEO NOW

    I M T R A S HツI M T R A S HツPrieš 23 dienas
  • You're a god

    Ibrahim ShabibyIbrahim ShabibyPrieš 23 dienas
  • you're an amazing guy

    Mecegguem MohamedMecegguem MohamedPrieš 23 dienas
  • If it’s free you’re not renting it from the Auto store, you’re borrowing it. Renting something requires payment of financial consideration.

    Ronan RogersRonan RogersPrieš 24 dienas
  • any rear suspension videos?

    Joshua RivasJoshua RivasPrieš 24 dienas
  • تفکیک پذیر نیست چون منابع کلاسیک نداری اغشته به هم هستند . اگر به فرض محال هم تفکیک پذیر بود من چنین حماقتی به خرج نمی دادم

    moein kasraeimoein kasraeiPrieš 25 dienų
  • Man, I love your enthusiasm. Awesome

    Ryan RRyan RPrieš 25 dienų
  • Still waiting on that turbo video to come out!

    Jonathan TejadaJonathan TejadaPrieš 26 dienų
  • If you can't squeeze those pliers enough to indent the retaining washer on the tie-rod - use a c-clamp.

    Tim STim SPrieš 27 dienų
  • Great video. This stuff looks so easy but trust me you do not want to do this on a car that is rusty underneath! lool

    Louis NguyenLouis NguyenPrieš 27 dienų
  • Good job

    Mohammed HassanMohammed HassanPrieš 27 dienų
  • I just have seen the best video on the internet 💜

    Engr Salman SiddiquiEngr Salman SiddiquiPrieš 27 dienų
    • Thanks a lot!!

      ChrisFixChrisFixPrieš 27 dienų
  • I just have seen the best video on the internet 💜

    Engr Salman SiddiquiEngr Salman SiddiquiPrieš 27 dienų
  • nice work

    weTecweTecPrieš 28 dienų
  • Holy moly the body roll didn't think this car would do that

    jesus Spartanjesus SpartanPrieš mėn
  • I like the production of your videos, so detailed and thorough. Really neat.

    Pedro BarbosaPedro BarbosaPrieš mėn
  • Chrisfix could definetly save The world with medium strenght threadlocker and common hand tools from his driveway

    LuddZoRLuddZoRPrieš mėn
  • i love this Car men

    Enchong GoEnchong GoPrieš mėn
  • I wish you could do that with the Datsun 620

    1 CHALO. EL MACHO PRIETO.1 CHALO. EL MACHO PRIETO.Prieš mėn
  • if i were you i wouldnt ad gress to the brake pads ore else it will sling off when it spins. WORNING!!!!!!!!!!!!!!!!!!!!!WORNING.

    Malacai LebaronMalacai LebaronPrieš mėn
  • Just wanna say, DON'T use an impact on a tool like this. They're typically just cast aluminum, and an impact will DESTROY the threads on them. I learned this the hard way a few years ago when I rented a spring compressor and used an impact on it, and it trashed the threads and I ended up having to pay to replace it. ALWAYS just use a ratchet on it

    SGS JakeSGS JakePrieš mėn
  • Awesome video, love the channel! I noticed, you correctly pressed the bearing in the bore at 5:45. Then at 7:41, you are not supporting the inner race when pressing the shaft into the bearing. Bearing in bore, support outer race, shaft in bearing, support inner race. Thanks for your time.

    Steve RogersSteve RogersPrieš mėn
  • Hey Chris, I usually don't leave comments BUT when I witness something that is so outstanding I feel obligated. I have seen hundreds of Utube videos and yours is very good! You emphasize the right words at the right moments. You speak at the right volume with perfect clarity. You have sped up the video when needed not to waste our time when watching (thank you). I got my oldest son to watch because we want to fix the worn-out front end on his 1997 Jeep Grand Cherokee with 300k miles. Your video kept his attention, which is a major feat, but he said "I like how Chris broke it up into two videos because most people video both the teardown and the reinstallment in one video and that is too much to take in one sitting". I could go on... and I want to end by saying: the excellence of your video really hit me after "I slept on it" (so to say) because it was last night that I saw it for the first time. I wanted my son to see your video. This comment comes after the second viewing. Job well done... A+ '

    Douglas WennenDouglas WennenPrieš mėn
LTworlds